Custom designed plasma systems

Where specific problems exist Plasma technology are pleased to partner with you to develop both the optimal system and process to help you achieve your goals.

These may be in the form and size of your products, handling roll goods or even powders. Special needs such as maintaining low temperatures on conductive parts by avoiding high energy concentrations in cavities. Very even treatment throughout the chamber. All typical problems solved by a combination of good equipment design and process engineering.

Examples :

PlasmaActivate 260 DT

A double door system used as an entry point to a clean area. The system has alternate layers of electrodes and trays for small parts to get maximum use of the chamber volume parts.

Plasma system custom designed. PlasmaActivate 260 DT  with douible doors 

 

Specifications:

External dimensions W x H x D: 2600 x 2300 x 1000 mm

Chamber dimensions W x H x D: 650 x 500 x 800 mm
The actual usable chamber volume will vary according to the electrode and or the parts loading system.

Controls: SPS (Vipa, Siemens)

Variable parameters: Time, pressure and power.

Generator: 40 khz, 5000w

PlasmaActivate 650 

A plasma coating system using trolly loading.

Plasma system PlasmaActivate 650, low pressure plasma system for plasma coating  

Specifications:

External dimensions W x H x D: 2600 x 2300 x 2500 mm

Chamber dimensions W x H x D: 12000 x 320 x 1700 mm
The actual usable chamber volume will vary according to the electrode and or the parts loading system.

Controls: SPS (Vipa, Siemens)

Variable parameters: Time, pressure and power.

Generator: 40 khz, 5000w

PlasmaActivate 1000

Low pressure plasma system incorporating a rotating drum for handling of bulk parts. By rotating the parts in the all sides are treated without the need to open the system and manually turn the parts over.

Low pressure plasma system PlasmaActivate 1000,  

Specifications:

External dimensions W x H x D: 3140 x 2773 x 2134 mm

Chamber dimensions W x H x D: 1000 x 1000 x 1450 mm
The actual usable chamber volume will vary according to the electrode and or the parts loading system.

Controls: SPS (Vipa, Siemens)

Variable parameters: Time, pressure and power.

Generator: 40 khz, 5000w

PlasmaActivate 3600

Low pressure plasma system with automatic door controls. By opening one door to load parts and the other on the opposite side treated and untreated parts are kept separate. This ensures a controlled material flow and ensures for example that only treated parts will be painted.

Low pressure plasma system PlasmaActivate 3600,

Specifications:

External dimensions W x H x D: 4000 x 3000 x 5000 mm

Chamber dimensions W x H x D: 1300 x 2000 x 1400 mm
The actual usable chamber volume will vary according to the electrode and or the parts loading system.

Controls: SPS (Vipa, Siemens)

Variable parameters: Time, pressure and power.

Generator: 40 khz, 5000w

PlasmaActivate 8200 r2r

Low pressure plasma system with automatic door controls for handling roll goods.
The membrane to be treated is rolled during the process so that in a single process the complete roll is prepared for the next process step.

Plasma system for roll goods. Roll to roll .

Specifications:

External dimensions W x H x D: 6900 x 4050 x 2400 mm

Chamber dimensions W x H x D: 2780 x 1950 x 1750 mm
The actual usable chamber volume will vary according to the electrode and or the parts loading system.

Controls: SPS (Vipa, Siemens)

Variable parameters: Time, pressure and power.

Generator: 40 khz, 5000w